Table of Contents
Advertisement
25. Using the four socket head bolts (1) removed earlier,
secure the right support bracket (2) to the drop box
housing.
26. Torque the bolts to 235 N·m (173 lb ft).
27. Apply a quality grease such as NEW HOLLAND
A
GR 75 MD to the gear splines. Push the
MBRA
reversing gear input shaft inward, engage the splines
in the engine adaptor and continue to install until the
shaft is flush.
28. Torque the bolts for the right and left support bracket
(to the engine) to 30 - 40 N·m (22 - 30 lb ft). Check
the shaft movement:
• If the shaft moves in and out freely, continue to
tighten the bolts while checking shaft movement.
Tighten to a final torque of 122 N·m (90 lb ft).
• If the shaft binds, loosen the mounting bolts for the
support brackets. Adjust the brackets, retorque the
bolts to 30 - 40 N·m (22 - 30 lb ft), and check shaft
movement. Repeat until the shaft moves freely.
Continue to tighten the bolts while checking shaft
movement. Tighten to a final torque of 122 N·m
(90 lb ft).
29. Remove the bolt from the output shaft.
Engine - Engine and crankcase
47533593 01/10/2013
10.1 [10.001] / 28
15
RCPH11CCH001BAB
16
RCPH10CCH923AAB
17
RCPH10CCH922AAB
Hide quick links:
Advertisement
Table of Contents
