10. Install the deaeration tank to engine fill hose (1), and
tighten the hose clamp.
11. Install the air intake tube to the air cleaner outlet (1).
Do not tighten the hose clamp (2) at this time.
12. Using the bolts (1) removed earlier, secure the air in-
take tube (2) to the support bracket.
13. Connect the air intake elbow (3) to the pipe.
14. Do not tighten the hose clamp (4) at this time.
15. Connect the air inlet elbow (3) to the turbocharger.
NOTICE: Loose hose clamps could allow dust to enter the
turbocharge and engine causing premature wear.
NOTE: Tighten all intake air hose clamps at this time.
Engine - Cylinder heads
47533593 01/10/2013
10.2 [10.101] / 7
4
RCPH11CCH970AAB
5
RCPH10CCH064BAB
6
RCPH10CCH808AAB
7
RCPH10CCH809AAB