20. Install the left support bracket (1) with the four mount-
ing bolts (2) removed earlier. Do not tighten.
21. If the output shaft (1) for the engine drop box has been
installed, remove by installing a bolt (2) into the end of
the shaft and pulling forward approximately one half
way.
22. Properly support the drop box housing and carefully
place into position between the support brackets.
23. Using the four socket head bolts (1) removed earlier,
secure the left support bracket (2) to the drop box
housing.
24. Torque the bolts to 235 N·m (173 lb ft).
Engine - Engine and crankcase
47533593 01/10/2013
10.1 [10.001] / 27
11
RCPH11CCH005AAB
12
RCPH10CCH923AAB
13
RCPH10CCH078BAB
14
RCPH11CCH005AAB