New Holland T8.275 Service Manual page 59

49. Install the starter solenoid wire (1), tighten the attach-
ing screw (2) and install the plug (3).
50. At the starter, connect the battery ground (-) cable (1),
and secure with the nut removed earlier.
51. Connect the battery positive (+) cable (2) and alterna-
tor output cable (3), and secure with the jumper stud
(4). Install the protective cover (5).
52. Connect the engine to front frame grounding strap (6)
and secure with the starter mounting bolt.
53. Connect the exhaust pipe assembly (1) to the tur-
bocharger outlet flange. Do not tighten the clamp (2)
at this time.
54. Install new O-ring seals and connect the air condition-
ing high (1) and low (2) pressure fittings. Tighten the
fittings using the two hand, two wrench method.
Engine - Engine and crankcase
47533593 01/10/2013
10.1 [10.001] / 33
31
RCPH10CCH818AAB
32
RCPH10CCH919AAB
33
RCPH10CCH917AAB
34
RCPH10CCH920AAB