Valve cover - Install - Over head components
T8.275, T8.300, T8.330, T8.360, T8.390, T8.420 [ZCRC02586 - ]
Prior operation:
Valve cover - Install - Over head components (10.101)
1. Inspect the O-ring seal for the valve cover and replace
as required.
2. Install the valve cover with the 18 bolts (1) removed
earlier.
3. Starting at the center of the valve cover, tighten the
bolts in a crossing pattern (2).
4. Torque all bolts to 7 - 10 N·m (5.2 - 7.4 lb ft).
5. Install the turbocharger support bracket (1).
6. Torque bolts (2) to 60 - 70 N·m (44 - 52 lb ft).
7. Torque mounting bolts (3) that were removed earlier to
38 - 45 N·m (28 - 33 lb ft).
8. Using the three bolts (1) removed earlier, secure the
tube support bracket (2) to the engine block.
9. Place the engine coolant fill tube into the tube clamp
and secure with the nut removed earlier.
Engine - Cylinder heads
47533593 01/10/2013
10.2 [10.101] / 6
1
RCPH11CCH973AAB
2
RCPH11CCH972AAB
3
RCPH11CCH971AAB