109. Position the hydraulic oil/fuel cooler (1) over its
mounting studs (2).
tighten until there is minimal up/down movement
and it still opens freely.
110. Install new O-ring seals. Using the two hand, two
wrench method, tighten the oil supply and return tube
fittings (3).
111. Connect the fuel into and from fuel cooler hoses (1)
and engage the hose clamps (2)
112. Position the air conditioning condenser (1) over
it's mounting studs (2). Install the nylock nuts and
tighten until there is minimal up/down movement
and it still opens freely.
113. Install new O-ring seal and using the two hand two
wrench method, tighten the condenser outlet fitting
(3).
114. Install new O-ring seal and using the two hand two
wrench method, tighten the filter/dryer inlet fitting (4).
Engine - Engine and crankcase
Install the nylock nuts, and
47533593 01/10/2013
10.1 [10.001] / 43
66
RCPH10CCH055BAB
67
RCPH10CCH897AAB
68
RCPH10CCH054BAB