New Holland T8.275 Service Manual page 75

Valve cover - Remove - Over head components
T8.275, T8.300, T8.330, T8.360, T8.390, T8.420 [ZCRC02586 - ]
Prior operation:
Battery - Disconnect (55.302)
1. Drain approximately 2 - 4 l (2.1 - 4.2 US qt) coolant
from the engine coolant system.
2. Disengage the hose clamp (1) and disconnect the en-
gine blow-by tube (2) at the engine air intake to tur-
bocharger.
3. If equipped, disconnect the air inlet pipe (3) for the air
compressor.
4. Remove the exhaust shield (1) and set aside.
5. Loosen the hose clamp (1) and disconnect the air inlet
elbow (2) at the turbocharger.
Engine - Cylinder heads
47533593 01/10/2013
10.2 [10.101] / 3
1
RCPH10CCH061BAB
2
RCPH10CCH906AAB
3
RCPH10CCH809AAB