87. Using the bolts (1) removed earlier, secure the ex-
haust pipe shield (2) to the support bracket.
88. Connect the following hoses and pipes:
• Fuel supply hose (1)
• Fuel return hose (2)
• Engine blow-by pipe (3)
• If equipped, the air compressor inlet pipe (4)
• Engage and tighten all hose clamps as required.
89. At the front of the engine, install the engine blow-by
pipe (1) and engage the hose clamp (2).
Engine - Engine and crankcase
47533593 01/10/2013
10.1 [10.001] / 39
52
RCPH10CCH906AAB
53
RCPH10CCH061BAB
54
RCPH10CCH807AAB