New Holland T8.275 Service Manual page 68

99. Connect the engine coolant inlet (1) and outlet (2)
hoses. Install and tighten the hose clamps.
100. Install a new O-ring seal (1) on the air cooler outlet
pipe to the intake manifold flange.
101. Install a new O-ring seal on the turbocharger outlet
to the air cooler inlet pipe.
102. Install the intake air pipe (1)
103. Tighten flange clamp (2) and (3).
104. Install the turbocharger outlet to air cooler inlet pipe
(4).
105. Tighten the flange clamp at the turbocharger (not
shown).
106. Tighten hose clamp (5).
107. Install new O-ring seals. Using the two hand two
wrench method, tighten the hydraulic oil cooler sup-
ply and return hoses (6).
108. Using the bolts (1) removed earlier, secure the right
hose support bracket (2).
Engine - Engine and crankcase
47533593 01/10/2013
10.1 [10.001] / 42
62
RCPH10CCH902AAB
63
RCPH10CCH903AAB
64
RCPH10CCH056BAB
65
RCPH10CCH899AAB