79. Connect the lower exhaust pipe (1) to the converter
inlet (2). Do not tighten the clamp.
80. Secure the support clamp (3) using the bolt removed
earlier.
81. Connect the upper (1) and lower (2) exhaust pipes.
82. Tighten the exhaust pipe clamp (3).
83. Secure the insulating blanket (4).
84. Check and tighten all exhaust pipe clamps.
85. Using the bolts (1) removed earlier, attach the exhaust
shield mounting bracket (2).
86. At the selective catalytic reduction doser (1), connect
the harness (2) and the supply and return hoses (3).
Engine - Engine and crankcase
47533593 01/10/2013
10.1 [10.001] / 38
48
RCPH10CCH063BAB
49
RCPH10CCH910AAB
50
RCPH10CCH909AAB
51
RCPH10CCH908AAB