Economic Function "Eco Mode; Reignition Delta" Function; Autonomy" Function; Replenishment" Function - Jøtul PF 1230 Installation, Operation And Maintenance Manual

ENGLISH
10�2 ECONOMIC FUNCTION "ECO MODE"
This function shuts down the stove after the programmed
ambient temperature is reached. If this function is not
active, the stove will modulate its operation in order
to maintain the set temperature at minimum fuel
consumption. The "Eco Mode" function is only available
in configuration 1.
To activate/deactivate this function:
a) Using keys , select the Configuration menu
press .
b) Select the item using button
"7"
.
c) Select submenu confirm by pressing button
[7]
d) Set one of the following parameters using buttons
J Confirmation of the "Eco Mode" function
Eco
J Deactivation of the "Eco Mode" function
Off
e) Press button , to confirm the setting.
10�3 "REIGNITION DELTA" FUNCTION
The reignition delta is the number of degrees below the
extinguishing temperature, which, when exceeded, will
cause the stove to reignite automatically. For example,
if the stove is programmed to extinguished at 20°C (Eco
mode on), and "Reignition delta" is set to 4°C, the stove
will reignite after detecting a temperature of 16°C or
lower.
To change the desired Reignition delta value:
a) Using keys , select the Configuration menu
press .
b) Select the item using button and confirm by pressing
"7"
button .
c) Select submenu confirm by pressing button
[8]
d) The parameter will start to flash, change it using buttons
and (from 0.5°C to 5.0°C).
e) Press button , to confirm.
10�4 "AUTONOMY" FUNCTION
This function displays the hours of autonomous work
remaining until it will be necessary to replenish pellet.
Using the arrow keys, select icon
number of hours of autonomous work until it will be
necessary to replenish pellet will be displayed on the
screen. The hours of autonomous operation remaining
are calculated based on the parameters currently set on
the stove.
Estimated values are sufficiently reliable under the
condition that, upon every full replenishment of pellet,
the "FULL" value will be selected and confirmed. The
"Lo" value signifies reserve status.
10�5 "REPLENISHMENT" FUNCTION
This function makes it possible to register filling of the
container with pellet.
In this way, based on operating parameters, the stove is
capable of calculating the hours of autonomous operation
remaining until it will be necessary to replenish the
container.
After complete filling of the pellet container:
16
and
and confirm by pressing
.
:
and
.
, and the estimated
a) Using the arrow keys
press the send button
b) Using keys , select the
"send" button .
To disable this function, select
10�6 REIGNITION AFTER POWER FAILURE
After a break in power supply, the stove will automatically
reignite and perform auto-diagnostics after power is
restored.
10�7 "KEYBOARD LOCK" FUNCTION
This function makes it possible to lock the keyboard in
order to prevent unintended changes.
To activate/deactivate this function:
a) Using keys , select the Configuration menu
press .
b) Select the item using button
"7"
button .
c) Select submenu confirm by pressing button
[10]
d) Set one of the following parameters using buttons
Keyboard lock off
„ "
Off
Only the ignition/extinguishing button
„ "
Lo
active
Keyboard lock on
„ "
Hi
e) Press button , to confirm the setting.
10�8 MINIMUM TEMPERATURE
(Only in configuration 1)
It is possible to program the minimum temperature
below which the stove will ignite (besides programmed
time intervals). To change the "minimum" temperature
parameter:
a) Using keys , select the Configuration menu
press .
b) Select the item using button
"7"
button .
c) Select submenu confirm by pressing button .
[9]
d) The parameter will start to flash, change it using buttons
.
(OFF; 3-20°C)
e) Press button , to confirm the setting.
, select the fuel icon
.
option and press the
"FULL"
instead of
"OFF" "FULL"
and confirm by pressing
and confirm by pressing
, then
.
and
.
:
is
and