Using The Stove; Firing; Modification Of Parameters - Jøtul PF 1230 Installation, Operation And Maintenance Manual

ENGLISH
a) Using the arrow keys
and press .
b) Select the item using button
"7"
button .
c) Using button , select submenu
button.
d) The time parameter will start flashing, change it using the
keys, then press button
e) The minutes parameter will start flashing, change it using the
keys, then press button
f) The day parameter will start flashing, change it using the
keys, then press button
g) The month parameter will start flashing, change it using the
keys, then press button
h) The year parameter will start flashing, change it using the
keys, then press button
i) The current day of the week parameter (Monday =
etc., Sunday = ) will start flashing, change it using the
7
keys.
j) Press button , to confirm the setting.
8�3�2 Setting screen brightness
Screen brightness can be adjusted when the screen is in
standby mode.
a) Using keys , select the Configuration menu
press .
b) Select the item using button
"7"
button .
c) Using button , select submenu
button .
d) Set the desired brightness (
and , then confirm using button
8�3�3 Display settings
The objects that are displayed when the screen is in
standby mode can be configured.
Using the arrow keys
a) Using keys , select the Configuration menu
press .
b) Select the item using
"7"
button .
c) Using button , select submenu
the button.
d) Set one of the following parameters using buttons
and :
• The last visualisation performed by the client will
„ "
OFF
be displayed on the screen.
• All parameters can be displayed periodically.
„ "
1
• Temperature can be displayed (read by the
„ "
2
ambient temperature sensor).
• The current time can be displayed.
„ "
3
• The number of hours of autonomous work
before reloading of the pellet container can
„ "
4
be displayed, if the "refilling" function was
confirmed.
e) Press button , to confirm the setting.
14
select the Configuration menu
and confirm by pressing
and confirm using the
[3]
.
.
.
.
and confirm by pressing
and confirm using the
[11]
, from to ) using buttons
OFF 1 5
.
, select the settings menu
button and confirm by pressing
and confirm using
[12]
8�3�4 Setting of the sound signallers volume
The sound signallers volume can be set as desired.
a) Using keys
press .
b) Select the
"7"
pressing button
c) Using button
the button.
d) Set the desired volume (
and , then confirm using button
8�3�5 Setting pellet type
The type of pellet used can be set.
a) Using keys
press .
,
1
b) Select the
"7"
button .
c) Using button
the button.
d) Set one of the following parameters using buttons
:
• Standard
„ "
1
and
• Medium pellet
„ "
2
• Coarse pellet
„ "
3
e) Press button

9 USING THE STOVE

9�1 FIRING
To fire up the stove, press the
seconds.
The flame icon will start flashing during the activation
phase, then it will be lit up constantly, indicating that the
stove has been fired up.
;
Automatic firing: the stove is equipped with an automatic
device that allows for ignition of pellet without the need
and
to use traditional lighter blocks or fluids�
Do not fire up the stove manually if the automatic
ignition device is damaged�
Upon first firing of the stove, unpleasant odours may be
emitted, as a result of evaporation or drying of certain
structural materials� These odours will disappear over
time�
It is recommended to ventilate rooms well during first
firings.
Do not leave the furnace door open in order to avoid a
situation in which the closing sensor detects the open
door and activates an acoustic alarm.
9�2 MODIFICATION OF PARAMETERS
It is possible to change the stove's operating parameters,
as described in section 7.3.
Settings remain unchanged until they are changed, even
after extinguishing or disconnection of the stove from the
power supply�
, select the Configuration menu
item using button
.
, select submenu and confirm using
[13]
OFF, od 1 do 5
.
, select the Configuration menu
item using button and confirm by pressing
, select submenu and confirm using
[14]
, to confirm the setting.
button for several
and
and confirm by
) using buttons
and
and