Operating Parameters; Preliminary Activities; Filling With Pellet; Electrical Power Supply - Jøtul PF 1230 Installation, Operation And Maintenance Manual

7�3 OPERATING PARAMETERS
The stove's operation depends on user-defined parameters
of Power, Ventilation and Temperature.
7�3�1 Power change
Power corresponds to the amount of heat generated
by the stove and hence has a direct influence on fuel
consumption.
To change the power:
a) Using the arrow keys
press .
b) The power parameter will start to flash; change it by means
of the keys ( is the minimum,
1
c) Press button , to confirm the setting.
7�3�2 Ventilation change
To change the ventilation value:
a) Using the arrow keys
and press .
b) The ventilation value will start to flash, change the value
using the keys:
• = the fan is completely shut off, and the stove works
"OFF"
only with natural convection; (only in certain models);
• is the minimum and
"1" "5"
• = automatic work (the stove sets fan revolutions and
"Auto"
stove power independently depending on the temperature in
the room);
• = very fast operation (use only when it is necessary to
"Hi"
heat the room quickly).
c) Press button , to confirm the selected data.
If the right (R) or left (L) fan is selected, only ON and
OFF values can be activated.
• The right (R) and/or left (L) rear fan is switched on
and off by selecting the ON or OFF state. To set the
air flowrate in the left and right rear fan, adjust the
potentiometers provided for this purpose on the rear
of the appliance.
If the central fan is set to OFF and at least one of the two
rear fans is on, the central fan will automatically be set to
minimum.
• In the OFF position, the central fan automatically
adapts to the minimum speed if the rear right (R) and/
or left (L) fan is working.
7�3�3 Change of ambient temperature
A change of this parameter defines the desired room
temperature, which will be read directly by the sensor in-
stalled on the stove.
To change the desired temperature value:
a) Using keys , select the Temperature menu
press .
b) The current value will start to flash, and it can be changed
using the keys.
c) Press the key to confirm the adjustment.
select the Power menu and
is the maximum).
5
select the Ventilation menu
is the maximum;
and

8 PRELIMINARY ACTIVITIES

8�1 FILLING WITH PELLET
The first activity to be performed before firing up the
stove is to fill the pellet container.
Pellet should be put in the container using a small shovel.
Do not empty the bag directly into the container in order
to avoid dumping of sawdust or foreign bodies that may
disrupt the stove's normal operation, and do not spill
pellet outside of the container.
After loading pellet, it is necessary to close the container's
cover� The safety breaker switch (only in the models where
it is present) checks whether it is closed (IS in fig� 8�1) and
starts the alarm on the stove if the cover remains open for
over 60 seconds while the stove is working�
In the case where the "autonomy" function is enabled,
select the fuel icon
, then press the "send" button
select the "FULL" option and press the "send"
button .
To disable the autonomy function, select "OFF" instead
of "FULL".
IS
8�2 ELECTRICAL POWER SUPPLY
Connect the stove to the electrical grid by setting the
ignition switch in the rear part of the stove to "I" (fig. 8.2).
Switch-on of power is signalled by a series of interrupted
sound signals and lighting up of the screen.
In the case where a long period of idleness is planned, it
is recommended to set the switch at the back of the stove
to the OFF position (O)�
When connecting the stove to an electrical socket, re-
member not to touch the control panel�
8�3 PRELIMINARY SETTINGS
Before using the stove, the current language, date and
time must be set.
8�3�1 Setting the date and time
To change the date:
ENGLISH
by means of the arrow keys and
. Next, using keys
fig� 8�1
fig� 8�2
13