Safety
CYLINDER STOPS
Both header lift cylinders have cylinder stops. The
cylinder stops are activated by one lever outside the cab
door.
FIG. 26: To engage the cylinder stops (1), raise the
header completely. Move the lever (2) toward the cab and
then pull back toward the rear of the machine to engage
the cylinder stops. Make sure the cylinder stops are
completely engaged in both header lift cylinders.
FIG. 27: To disengage the cylinder stops, raise the
header completely. Move the lever (1) toward the cab and
then push forward toward the header to disengage the
cylinder stops. Make sure the cylinder stops are
completely disengaged from both header lift cylinders.
01-14
1
FIG. 26
FIG. 27
2
LA19997
1
1
LA19996
4283362M2