Cylinder Stops - If Equipped; Late Production Tractors; Early Production Tractors - MASSEY FERGUSON MF5200 Operator's Manual

SAFETY
Do not weld on the rim when a tire is installed. Welding
will make an air/gas mixture that can cause an explosion
and burn with high temperatures. This danger applies to
all tires, inflated or deflated. Removing air or breaking the
bead is not enough. The tire must be completely removed
from the rim prior to welding.

CYLINDER STOPS - IF EQUIPPED

Late Production Tractors

Late production tractors are not equipped with a
mechanical cylinder stop since the header down valve is
mounted directly to the header lift cylinder.

Early Production Tractors

Both header lift cylinders have cylinder stops. The
cylinder stops are activated by one lever outside the cab
door.
FIG. 27: To engage the cylinder stops (1), raise the
header completely. Move the lever (2) toward the cab and
then pull back toward the rear of the machine to engage
the cylinder stops. Make sure the cylinder stops are
completely engaged in both header lift cylinders.
FIG. 28: To disengage the cylinder stops, raise the
header completely. Move the lever (1) toward the cab and
then push forward toward the header to disengage the
cylinder stops. Make sure the cylinder stops are
completely disengaged from both header lift cylinders.
A-16
1
FIG. 27
FIG. 28
2
LA19997
1
1
LA19996
700735917 D Rev.