ACCUMULATORS
FIG. 20: The accumulators (1) are charged with dry
nitrogen. Use only dry nitrogen when charging the
accumulators. DO NOT use air or oxygen or an explosion
will occur.
DO NOT drop the accumulators. Charged accumulators
contains nitrogen under pressure. If the charging valves
break away from the accumulators, the escaping nitrogen
will propel the accumulators at a high rate of speed.
m
DANGER: Charging
accumulators must be performed by an
authorized dealer only.
CYLINDER STOPS
Both header lift cylinders have cylinder stops. The
cylinder stops are activated by one lever outside the cab
door.
FIG. 21: To engage the cylinder stops (1), raise the
header completely. Move the lever (2) toward the cab and
then pull back toward the rear of the machine to engage
the cylinder stops. Make sure the cylinder stops are
completely engaged in both header lift cylinders.
FIG. 22: To disengage the cylinder stops, raise the
header completely. Move the lever (1) toward the cab and
then push forward toward the header to disengage the
cylinder stops. Make sure the cylinder stops are
completely disengaged from both header lift cylinders.
4283389M1
or
replacing
the
FIG. 20
1
FIG. 21
FIG. 22
Safety
1
JC01036
2
LA19997
1
1
LA19996
01-13