Table of Contents
Advertisement
INTRODUCTION
The operating and maintenance instructions included in
this manual are assembled from field testing and other
data. The information is written for general conditions.
Make adjustments as necessary for specific conditions.
UNITS OF MEASUREMENT
Measurements are given in metric units followed by the
equivalent in U.S. units. Hardware sizes are given in
millimeters for metric hardware and inches for U.S.
hardware.
REPLACEMENT PARTS
To receive efficient service, always give the dealer the
following information:
•
Correct part description or part number.
•
Model number of the machine.
•
Serial number of the machine.
MACHINE IDENTIFICATION
FIG. 1: Each machine is identified by a model and serial
number on the serial number plate (1). The serial number
plate is located on the left-hand end of the header.
NOTE: Always give the model number and serial number
in any communication to your Dealer.
Machine Model Number: ________________________
Machine Serial Number: _________________________
Date of Delivery: _______________________________
Dealer Name and Address:
____________________________________________
____________________________________________
____________________________________________
Dealer Telephone Number: _______________________
Dealer Fax Number: ____________________________
4283362M2
GENERAL INFORMATION
General Information
1
FIG. 1
M811965
02-1
Advertisement
Chapters
Table of Contents
