Table of Contents
Advertisement
FIG. 11: Do not operate the machine with the drive shaft
shields open or removed. Entanglement in rotating drive
shafts can cause serious injury or death. Stay clear of
rotating components.
Make sure rotating guards turn freely.
Do not make adjustments to the roll tension with the
header engaged.
When making adjustments to the roll pressure, turn off the
header. Lower the header to the ground and engage the
parking brake. Set the engine to low idle.
Exhaust Warning
FIG. 12: Never operate the engine in a closed building
unless the exhaust is vented outside.
Flying Debris
FIG. 13: Never stand near the machine during operation.
Debris can be thrown from the machine during operation
possibly resulting in injury.
m
WARNING: Be
along the side of a road or building. Rocks
or other debris can be thrown from the
machine
during
resulting in injury.
Tilt the header back in fields where stones
and foreign objects are present. This will
raise the cutting knives and minimize
debris being thrown by the rotating knives.
4283362M2
careful
when
operating
operation
possibly
Find manuals at https://best-manuals.com
FIG. 11
FIG. 12
FIG. 13
Safety
WC1941
WC1949
D-8278
01-7
Advertisement
Chapters
Table of Contents
