Cylinder Stops - If Equipped; Early Production Tractors; Late Production Tractors - MASSEY FERGUSON 9186 Service Manual

Safety

CYLINDER STOPS - IF EQUIPPED

Early Production Tractors

Both header lift cylinders have cylinder stops. The
cylinder stops are activated by one lever outside the cab
door.
FIG. 27: To engage the cylinder stops (1), raise the
header completely. Move the lever (2) toward the cab and
then pull back toward the rear of the machine to engage
the cylinder stops. Make sure the cylinder stops are
completely engaged in both header lift cylinders.
FIG. 28: To disengage the cylinder stops, raise the
header completely. Move the lever (1) toward the cab and
then push forward toward the header to disengage the
cylinder stops. Make sure the cylinder stops are
completely disengaged from both header lift cylinders.

Late Production Tractors

Late production tractors are not equipped with a
mechanical cylinder stop since the header down valve is
mounted directly to the header lift cylinder.
01-14
1
FIG. 27
FIG. 28
2
LA19997
1
1
LA19996
4283484M1