Table of Contents
Advertisement
Removing a SIM Card
To remove the SIM card, push the SIM card in. The device ejects the SIM card.
Mounting Device to Flat Surface
1.
Locate the groove on the bottom of the device.
2.
Slide the mounting bracket through the groove.
3.
To secure the bracket to the desired surface, place and tighten two screws in the holes on either end of
the mounting bracket. The dimensions illustration in this guide shows the mounting bracket, as well as
the dimensions for placement of the screws.
®
MultiConnect
microCell MTCM-LAT3 and -LSP3 User Guide
INSTALLING AND USING THE DEVICE
15
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiConnect microCell and is the answer not in the manual?