Replacing The Sensor Unit; Replacing The Solenoid - Sega Ghost Squad Owner's Manual

REPLACING THE SENSOR UNIT

● Follow instructions of "Replacing the Microswitch" to remove the cover L.
● Remove the connector to replace the sensor unit.
SENSOR UNIT
JPT-2030
● Refer to the previous item, then attach COVER R while being careful of each of the parts.
● After replacement, perform a GUN ADJUSTMENT, referring to the instructions in "Game Test Mode".

REPLACING THE SOLENOID

● Follow instructions of "Replacing the Microswitch" to remove the cover L.
www.sauservice.com
PHOTO 10 f
94
Remove the connector.