Handling The Laser Redirection Attachment (Ha-D50Bn; Attaching; Removing - Casio IT-600 Series User Manual

Handling the Laser Redirection Attachment (HA-D50BN)

Attaching

1.Attach the laser redirection attachment onto the Handheld Terminal as shown in the
drawing.

Removing

1.Remove the laser redirection attachment toward the direction indicated by the front
arrow while pushing in the buttons on both sides as indicated by two small arrows.
Important!
• Be careful not to touch the barcode reader port when attaching the laser
redirection attachment. Touching the barcode reader port can cause a poor
reading performance.
• Always make sure to push on the buttons on both sides when removing the laser
redirection attachment. Attempting to forcibly remove the laser redirection
attachment without pushing on the buttons can damage the attachment.
• Do not subject the end of the laser redirection attachment to strong impact.
This can damage the laser redirection attachment.
• Do not use the laser redirection attachment outdoors during inclement weather.
This can cause a poor reading performance.
IT600_E_P52_55.p65 55
E-55
05.10.25, 9:52 AM