Loading And Removing The Battery Pack - Casio IT-600 Series User Manual

Handheld terminal
Hide thumbs Also See for IT-600 Series:
Table of Contents

Advertisement

Loading and Removing the Battery Pack

E-20
IT600_E_P14_39.p65
More user manuals on
Your Handheld Terminal uses two types of battery: a battery pack and a memory
backup battery.
The battery pack is used to power normal operations and to store data, while the
memory backup battery provides the power required to maintain memory contents
when the battery pack power is unable to supply power for some reason.
The operating power is supplied by a battery pack. You can choose between a battery
pack (HA-D20BAT) and a large-capacity battery pack (HA-D21LBAT).
The backup battery is installed inside of the Handheld Terminal.
This guide uses the following terms to refer to the batteries.
Battery Pack:
Rechargeable battery pack (HA-D20BAT or HA-D21LBAT) for
normal operations and data storage
Backup Battery: Built-in battery for memory backup
When the battery pack power goes low, immediately charge it or replace it with a
charged battery pack.
You can use the Dual Battery Charger, the Cradle-type Charger, or the USB Cradle to
charge a battery pack. See the sections of this guide that cover the Dual Battery
Charger, the Cradle-type Charger, and the USB Cradle for information about how to use
them for charging.
Important!
Always keep backup copies of all important data!
• The battery pack powers normal operation and also provides power required to
maintain memory contents, while the backup battery provides backup power to
maintain memory contents. Because of this, you should not remove the battery
pack if the backup battery is dead. Removing the battery pack while the backup
battery is dead causes data in the memory to be corrupted or lost. Note that
once data is lost it cannot be recovered. Always keep separate backup copies of
all important data.
• The charge of a battery pack when you purchase it may be depleted due to
testing at the factory or natural discharge during shipment and storage. Be sure
to charge the battery pack before you use it.
• The life of a battery pack is limited, and charging a battery pack causes it to
gradually lose its ability to maintain the charge. If your battery pack seems to
require charging very frequently, it probably means it is time to purchase a new one.
• A fully charged backup battery can maintain memory (RAM) contents for about
10 minutes, even when the battery pack is removed.
• The backup battery achieves a full charge in about four days when the battery
pack is loaded.
20
ManualsBase.com
05.10.25, 9:50 AM

Advertisement

Table of Contents
loading

This manual is also suitable for:

It-600m30It-600m30cIt-600m30rIt-600m30cr

Table of Contents