Table of Contents
Advertisement
Handling miniSD Cards
Installing
E-32
IT600_E_P14_39.p65
More user manuals on
The Handheld Terminal supports miniSD card.
Since the miniSD card slot is located inside the battery pack compartment, first remove
the battery pack when installing or removing a miniSD card.
Refer to p. 20-22 for information on "Loading and Removing the battery pack". Install
(or replace) a miniSD card according to the procedure described below.
1. Check that the power is turned off. If the power is on, always make sure to turn it off
by pressing the Power Key.
2. Remove the battery pack.
3. Insert the miniSD card with the top of the card (containing lettering) facing up by
properly aligning with the slot.
• Although some resistance may be felt when the card is inserted, gently insert the card
all the way into the slot until it contacts the back of the slot.
• Do not push in the card on the angle.
4. Load the battery pack.
32
ManualsBase.com
05.10.25, 9:50 AM
Advertisement
Table of Contents
