Cards; Using Compact Flash (Cf) Card - Casio IT-10M20 Manual

Cards

Using a Compact Flash (CF) Card
The Rugged PDA supports use of Type I and Type II (3.3V) Compact Flash cards.
The following are the types of Compact Flash cards supported by the Rugged
PDA.
Memory Card
A memory card works the same way as the data storage memory of the Rugged
PDA. You can use a memory card to store files created with the Rugged PDA, and
install programs on a memory card. Since data stored on a memory card is
retained even when the card is removed from the Rugged PDA, a memory card
can be used to transfer data between the Rugged PDA and a PC or other devices,
or to backup the Rugged PDA data.
Modem Card
A modem card can be used to connect the Rugged PDA to a general telephone
line (household modular jack, public phone equipped with a modular jack, etc.)
LAN Card
A LAN card (Ethernet card) makes it possible to connect the Rugged PDA to an
Ethernet network.
Communication Card
A cell phone or PHS communication card provides data communication capabili-
ties using a cell phone or PHS circuit.
• Before using a modem, LAN, communication, or similar card, make
• Never turn off power or remove a memory card from the Rugged PDA
118
sure that the Rugged PDA's battery pack is charged sufficiently. Low
battery power during communication can cause unstable communi-
cation, loss of the data that is being used, and powering down of the
Rugged PDA.
while data is being written to or read from the card. Doing so can
damage the memory card or its data.