RH Baby&child JAMESON STORAGE CONVERSION CRIB Assembly Instructions Manual page 10

STEP 4
FRONT RAIL ASSEMBLY
STEP 4.1
Both ends of the front rail have holes for the bolt to pass through
that correspond to the holes on the posts for both side rail panels
with pre-installed nuts. Attach the front rail frame to the side rail
panels by using Allen bolts (BB) with lock washers and plain
washers. See DETAIL H.
STEP 4.2
Use Allen bolts (BB), lock washers and plain washers to fix the
storage to the front rail frame, as illustrated in DETAIL I.
After assembly, re-tighten all bolts for a snug fit. DO NOT OVER
TIGHTEN.
STEP 4.3
Return the drawers to the storage.
(BB)
HARDWARE NEEDED FOR STEP 4
(BB) 1/4" x 1 1/4 " Allen Bolt = 6 pcs
Lock Washers 1/4" = 6 pcs
DETAIL H
(BB)
DETAIL I
Plain Washers 1/4" = 6 pcs
Allen Wrench = 1pc
10/12