Advertisement
Quick Links
Made in Vietnam
Distributed in the U.S.A. by:
Restoration Hardware Baby & Child
2900 North Macarthur Dr. Tracy,
CA95376, USA
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING: Read all
instructions before assembling this
product. KEEP INSTRUCTIONS
FOR FUTURE USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include
the product model number, color, and a brief description of the part. Call 1-800-762-1751.
CARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth.
Blot spills immediately and wipe with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original
hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included)
NOTE: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
tighten. Use wax or soap on all bolts to facilitate assembly
S
All Restoration Hardware cribs are designed to meet the highest safety
standards and comply with all U.S. and Canadian cribs and cradles regulations.
1
3
-
of a turn. After crib is completely assembled, return to each bolt and
2
4
Page 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for RH Baby&child Landry Storage
Summary of Contents for RH Baby&child Landry Storage
- Page 1 All Restoration Hardware cribs are designed to meet the highest safety standards and comply with all U.S. and Canadian cribs and cradles regulations. Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 2900 North Macarthur Dr. Tracy, CA95376, USA www.rhbabyandchild.com Distributed in Canada by:...
- Page 2 IMPORTANT SAFETY INFORMATION FOR CRIBS WARNING: Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant. WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death. ·...
- Page 3 IMPORTANT SAFETY INFORMATION FOR CRIBS CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES. WARNING Do not use this crib if you cannot exactly follow the instructions that come with it.
- Page 4 IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS WARNING: ENTRAPMENT / STRANGULATION HAZARD Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child.
-
Page 5: Item Identification
ITEM IDENTIFICATION For ease of identification, all parts are labeled to correspond to the step number in which the part is used. Step #1 Side rail panels and storage assembly (Page 6) Step #2 Mattress support assembly (Page 7) Step #3 Hedboard assembly (Page 8) Step #4 Front rail assembly and hide unused holes (Page 9) Step #5 Toddler rail assembly (Page 10) HEADBOARD... - Page 6 STEP #1 SIDE RAIL PANELS & STORAGE ASSEMBLY DETAIL A STEP# 1.1: Fully remove the drawers from the storage. STEP# 1.2: Bring the storage and the side rail panels in upright (AA) position. Align the locator pins on both ends of the storage to the bore holes in the side rail panels.
- Page 7 STEP #2 Support Arm MATTRESS SUPPORT ASSEMBLY DETAIL C STEP #2.1: Attach the support arms to the mattress support, using Allen bolts (BB), lock washers and plain washers. See DETAIL C. (BB) STEP #2.2: Hang the mattress support on both side panels by using Allen bolts (BB), lock washers and plain washers to attach the support arms into the fixed nuts in the side vertical rails of the side panels.
- Page 8 STEP #3 HEADBOARD ASSEMBLY STEP #3.1: Insert the headboard to the back sides of the side panels. STEP #3.2: Use Allen bolts (CC), lock washers and plain washers to attach the crib headboard to the side panels. Please see DETAIL E and DETAIL F. DETAIL E (CC) (CC)
- Page 9 STEP #4 FRONT RAIL ASSEMBLY AND HIDE UNUSED HOLES STEP 4.1: DETAIL G Both ends of the front rail have holes for the bolt to pass through that correspond to the holes on the posts for both side rail panels with pre-installed nuts.
- Page 10 STEP #5 TODDLER RAIL ASSEMBLY DETAIL I STEP #5.1: Loose all the bolts in both ends of the front side rail to disassemble the front side rail. (CC) STEP #5.2: Replace the front side rail by the toddler rail. See DETAIL I.
Need help?
Do you have a question about the Landry Storage and is the answer not in the manual?
Questions and answers