Advertisement

Quick Links

Made in Vietnam
Model No: 195 - 36/32
Distributed in the U.S.A by:
RH Baby&Child
2900 N MACARTHUR DRIVE
TRACY, CA 95376
www.rhbabyandchild.com
Distributed in Canada by:
RH Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia
V6E4N7
W AR N IN G : Re ad a ll
I nstr u ct ion s b efo r e as s emb lin g
this p r od uct .
KEEP I N ST RU CTI O NS F O R
FUTURE U SE .
1. Read all instructions before assembly crib. Keep instructions for future use.
2. Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
3. Infants can suffocate in gaps between crib sides and a mattress that is too small.

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to
the address above. Include the product model number, color, and a brief description of the part. Or call 1-800-762-1751.

CARE AND CLEANING

DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. If the crib is to be stored, store in a cool,
dry place and carefully package all original hardware to protect from loss.

TOOLS AND INSTALLATION

Tools needed: Key Wrench (included).
Two people are recommended for assembly.
When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After bed is completely assembled,
return to each bolt and tighten.
BE LL E UP H OLS T E RE D CON VERS I ON C RIB

TODDLER BED CONVERSION KIT (SOLD SEPARATELY)

Page 1 of 25

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BELLE UPHOLSTERED CONVERSION CRIB 195 - 36/32 and is the answer not in the manual?

Questions and answers

Summary of Contents for RH Baby&child BELLE UPHOLSTERED CONVERSION CRIB 195 - 36/32

  • Page 1 BE LL E UP H OLS T E RE D CON VERS I ON C RIB Made in Vietnam Model No: 195 - 36/32 Distributed in the U.S.A by: RH Baby&Child 2900 N MACARTHUR DRIVE TRACY, CA 95376 www.rhbabyandchild.com Distributed in Canada by: RH Canada, Inc.
  • Page 2 BE L L E UP H O LS T E R E D C O N VE RS ION C RI B WA RNI NG: Inf a nt s c a n s u f f o c a t e o n s o f t b ed di n g. Ne ver add a pill ow o r co mfo r ter . N ev e r p la c e a d di t io n a l pa d d in g u n der a n i n fan t.
  • Page 3 BE L L E UP H OLS T E RE D CO N V ERS ION C RIB AN Y M AT T R E SS U SE D I N T H IS C RI B M U S T B E AT L E AS T 2 7 1 / 4 CAUTIO N: I NCHE S B Y 5 1 5 / 8 I N CH ES WI T H A T H I C KN ESS N OT EXC EED IN G 6 I NCHE S .
  • Page 4 B E LL E U P H O LS T E RE D CON VERS I ON C RIB WAR NING : ENTR APM ENT/ST RA NGU LA TION HA ZA RD In fan ts h ave died in toddler beds f ro m entrap ment and strangulation. Fa ilure to foll ow these warning s an d th e assem bly instru ctions could result in serious injury or deat h .
  • Page 5 BE L L E UP H O LS T E RE D C O N V ERS ION CR IB PARTS I N CLUD E D : HE A DB O ARD FO O T BO A RD LE F T SI DE RA IL R I G H T SI DE RA I L M AT TRE S S SU P P O RT S TR E T CH E R BA RS...
  • Page 6 B E LL E U P H OLS T E RE D C ON V ERS ION C RIB ITEM DESCRIPTION QTY. Allen Key 4mm 1 piece Long Bolts 5/16" x 2-1/2" 6 pieces Short Bolts 6 x 32mm 12 pieces Middle Bolts 6 x 40mm 4 pieces Hex Nut 6 x 10mm...
  • Page 7 B E LL E U P H OLS T E RE D C O N VERS I ON C RI B ASSEMBLY INSTRUCTIONS Note: - Bed must be assembled by at least two people. - Please read instructions carefully before assembling bed. - Use the above parts and fittings list to identify each component.
  • Page 8 BE L L E UP H O LS T E R E D C O N VE RS ION C RI B STEP 2: Raise the Footboard (B) up and place the rod into the Left/Right Side Rails (C, D) at the bore holes' position.
  • Page 9 BE L LE U P H OLS T E RE D C O N VER SI ON C RI B STEP 3: Secure the Threaded Rod (3 ) into the Headboard (A). STEP 4: Raise the Headboard (A) up and place the rod into the Left/Right Side Rails (C, D) at the bore holes' position.
  • Page 10 B E LL E U P H OLS T E RE D C ON VERS I ON C RI B STEP 5: Attach the Headboard (A) to the Left/Right Side Rails (C, D) using Long Bolt (8) and tighten with Allen key (7).
  • Page 11 BE L LE UP H OLS T E RE D C ON V ERS ION C RIB STEP 7: Note: The Mattress Support (E) should be at the highest level when the child is born. It must be at the lowest level before the child can stand up.
  • Page 12 BE LL E U P H O LS T E RE D CON V ERS IO N C RIB STEP 8: Attach the Mattress Support (E) to the Stretcher Bars (F) using Middle Bolts (10), Flat Washer (13), Spring Washer (12), Hex Nut (11) and Cap Nut (14).
  • Page 13 BE L L E UP H OLS T E RE D CO N V ERS ION C RIB STEP 9: Secure the Mattress Support (E) into the crib. Then, insert Long Bolts (8) and Half Moon Washer (15) and tighten with Allen key (7). Page 13 of 25...
  • Page 14 BE L L E UP H O LS T E R E D C ON V ERS ION C RIB STEP 10: Carefully turn the Crib upright. W A R N I N G : After crib is completely assembled, return to each bolt and tighten to snug fit.
  • Page 15 BE L L E UP H O LS T E RE D C ON V ERS IO N C RIB PARTS IN CLU DE D: G [1 ] TOD DL E R R A I L HA RDWA RE IN C LUD ED : ITEM DESCRIPTION QTY.
  • Page 16 BE L LE U P H OLS T E RE D C ON V ERS ION C RIB STEP 11: Place the Crib down on a flat and smooth surface. Carefully unscrew and remove the 4 Long Bolts (8) with Half Moon Washer (15) on the Stretcher Bars (F) using Allen Key (17).
  • Page 17 BE LL E U P H OLS T E RE D C ON V ERS ION C RIB STEP 12: Remove the 4 Hex nuts (5) with Curved Slotted Washer (4) on the Left/Right Side Rails (C, D) using Hex Wrench (6). STEP 13: Remove the 4 Long Bolts (8) on back of the Headboard (A) using...
  • Page 18 BE L L E UP H O LS TE RE D C O N V ERS ION CR IB STEP 14: Remove the Headboard (A) from the crib. STEP 15: Remove the Footboard (B) from the crib by carefully unscrew and remove the 2 Small Bolts (1) and 2 Hex Nuts (5) with Curved Slotted Washer (4) on the Footboard (B).
  • Page 19 B E L LE U P H OLS T E RE D C O N VER SI ON C RI B STEP 16: Remove Metal Bracket (2) from the Left/Right Side Rails (C, D) by unscrew and remove the Small Bolt (1) with Allen Key (7). Next, remove the Threaded Rod (3) from the post of the Left/Right Side Rails (C, D).
  • Page 20 BE L L E UP HO LS T E R E D C ON V ERS IO N C RIB STEP 18: Attach the Headboard (A) to the Left/Right Side Rails (C, D) using Long Bolt (8) and tighten with Allen Key (17).
  • Page 21 BE L L E UP H O LS T E RE D C ON V ERS IO N C RIB STEP 20: Note: If Mattress Support (E) is not in the lowest position, move scissor assembly bars to the lowest position. The mattress support is easily adjustable to varying heights by loosening and removing all of the bolts from mattress support of the current level and inserting into a different...
  • Page 22 BE LL E U P H OLS T E RE D CON VERS I ON C RIB STEP 21: Insert the Small Bolts (9) in the upper holes of the Mattress Support (E) using Hex Nut (11) and Cap Nut (14). Tighten with Allen Key (17) and Hex Wrench (16).
  • Page 23 BE LL E U P H O LS T E RE D CO N V ERS ION C RIB STEP 23: Insert Long Bolts (8) and Half Moon Washer (15) and tighten with Allen key (17). Carefully turn the crib upright. W A R N I N G : After crib is completely assembled, return to each bolt and tighten to snug fit.
  • Page 24 BE LL E UP H OLS T E RE D CON VERS I ON C RIB WARNING : ADULT ASSEMBLY ONLY DUE TO SMALL PARTS, SHARP POINTS AND EDGES. B E D F R A M E ASS EMB LY I NST RUCT IO N S : 1.
  • Page 25 BE L L E UP H O LS T E R E D C O N VE RS ION C RI B P LATFO R M BE D A SS E M B LY I N ST R U CT I O N S : PA RTS I N CLUD E D : ITEM DESCRIPTION...

Table of Contents