Software For Network Settings - Canon W7200 Setup Manual

Software for Network Settings

TGARO Device Setup Utility
TRemote UI
TPrinter Operation Panel
2-2
Setting the Printer Network Information
When this printer is connected to a TCP/IP network, the IP address, subnet
mask, and other network information settings are required for the printer.
We recommend that you set the IP address with the GARO Device Setup
Utility first, and then use the Remote UI to set the subnet mask, default
gateway, and other network information settings.
These settings can also be done on the printer operation panel.
For more details about the IP address and other information assigned to the
printer, contact the network administrator. It is recommended that these
settings be done by the network administrator.
Windows software used on the computer to set the printer IP address and
network frame type. (Æ P.2-3)
Install on a computer that is connected to the printer through a LAN. This
cannot be used with a computer where the printer is connected locally.
Software that allows you to perform network information settings for the
printer, to display the current status of the printer, to cancel or temporarily
pause print jobs, or to display the print job history. This software utility is
built into the printer ROM. Use a Web browser from the computer to set the
printer IP address and to perform operation settings through the network.
(Æ User Manuals CD-ROM [Network Guide])
If the Remote UI is to be used, the IP address must be set on the printer.
Refers to the menus that can be used on the printer operation panel. You can
use the buttons on the operation panel to perform the network information
settings and set up other printer functions. (Æ P.2-9)