Canon W7200 Setup Manual page 92

Important
9
3-22
Installing the Software
TIEEE1394 Connection
Connect the IEEE1394 cable to the IEEE1394 port on the back of the printer
then to the IEEE1394 port on the computer.
Printer back
With a connector aligned correctly, push it all the way in to connect it
securely.
z Be sure to use a standard IEEE1394 connection cable with a 6-pin connector.
z For the W7250, the optional IEEE 1394 expansion board must be installed first.
(Æ P.4-3)
z Be sure to connect the correct type of interface cable. To avoid damaging the cable
or connectors, make sure the pins are aligned correctly when you connect the
cable.
When the next message asks you to confirm that you want to read the
README file, click the Yes or No button.
If you click the Yes button, the README file opens.
Computer