Canon W7200 Setup Manual page 22

Important
TSetting Up the W7200 or W7250 With the Stand
1
1-10
Setting Up the Printer
z When lifting and moving the printer, firmly grip the handles (a) provided
below each side of the printer. Gripping either side of the printer at any
other location is not safe and could cause the printer to fall and cause
personal injury.
a
z Save the box and all packing material. You will need these items again if you need
to move or ship the printer.
The printer is placed on the stand and then attached to the stand with hex
screws. One hex driver is packed with the printer unit and another is
provided with the stand.
Move the stand to where you want to set up the printer, then lock the
rear casters.
If you are installing the printer before moving it to its permanent location,
lock the rear casters. When you are finished setting up the printer, unlock the
casters and then lock them again after moving the printer to its permanent
location.
a