3
Important
TNetwork Connection
1
2
3-26
Installing the Software
Connect the IEEE1394 cable to the IEEE1394 port on the back of the
printer then to the IEEE1394 port on the Macintosh.
With a connector aligned correctly, push it all the way in to connect it
securely.
Printer back
z For the IEEE 1394 interface cable, use an IEEE 1394 Ver. 2.0 standard cable with a
6-pin connector.
z For the W7250, the optional IEEE 1394 expansion board must be installed first.
(Æ P.4-3)
Use a LAN cable to connect the LAN port of the printer to the HUB
port.
Push in the connector until you hear it catch.
Printer back
Use a LAN cable to connect the LAN port of the Macintosh to the
HUB port.
Push in the connector until you hear it catch.
Computer
HUB