Canon W7200 Setup Manual page 46

4
Caution
Important
5
1-34
Setting Up the Printer
Position the roll media as shown in the illustration, then insert the roll
holder.
z Before setting the roll media, place it horizontally on a flat surface. Roll
media is heavy so to avoid personal injury or damage to the roll, always
carefully lay a roll flat on a table or other stable flat surface.
z Insert the roll holder all the way into the roll media until it is tight. A gap between
the roll holder and the end of the roll could cause poor feeding.
Insert the holder stopper completely into the left end of the roll holder
until it stops.
The roll media is locked in place by the roll holder.