Canon W7200 Setup Manual page 47

6
Position the roll media as shown in the illustration, align the left and
right ends of the roll holder with the grooves at either end of the roll
media tray, then set the roll media in the tray.
If the roll media is unrolled, turn the roll as you set it.
Important
z When holding the roll holder, grip it by the ring. To avoid personal injury, do not
hold it by the shaft.
z While holding the roll holder, avoid touching the media anywhere other than the
leading edge of the media. If you touch the surface of the media on the print side,
this could cause poor printing.
7
Push in the roll release lever to release the paper guide.
1-35
7 Setting the Roll Media