Related Manuals for Adam Equipment MDW-160M
Summary of Contents for Adam Equipment MDW-160M
- Page 1 Adam Equipment MDW-160M MECHANICAL PHYSICIAN SCALE (P.N. 4283, Revision B2, December 2006) © Adam Equipment Company 2006...
- Page 2 © Adam Equipment Company 2006...
-
Page 3: Table Of Contents
CONTENTS INTRODUCTION....................3 SPECIFICATIONS ....................3 INSTALLATION....................4 GENERAL INSTALLATION................4 HEIGHT ROD INSTALLATION ..............6 MEASURING HEIGHT..................6 WEIGHING OPERATION ................... 8 © Adam Equipment Company 2006... - Page 4 © Adam Equipment Company 2006...
-
Page 5: Introduction
• It is simple to use and can be moved around with the help of the wheel attachment at the bottom of the scale. • The MDW-160M scale is widely applicable for use in business, schools, hospitals, clinics and sports departments. -
Page 6: Installation
− 6 no. M6 x 12 screws − 6 no. M6 Lock washers − 2 no. Hex Head screws − Tool (Spanner/Wrench) 1. Column with head 2. Height measuring rod 3. Platform base 4. Wheel attachment © Adam Equipment Company 2006... - Page 7 4. Hook at the end of the Draft rod 5. Lever with pivot 6. M6 screws Push the lever. When the lever is in position, hook the draft rod around the pivot. ← An assembled view © Adam Equipment Company 2006...
-
Page 8: Height Rod Installation
• Before the person steps onto the scale platform, the measuring arm should be lifted to the horizontal position, and raised well above the person’s apparent height. • The person may now step onto the scale platform. © Adam Equipment Company 2006... - Page 9 • Fold the measuring arm back to the vertical position and adjust the height rod back to the rest position (i.e. the measuring arm should be locked in place within the inner height rod and the inner rod should be at its lowest position). © Adam Equipment Company 2006...
-
Page 10: Weighing Operation
This will be indicated by the arrow indicator being in line with the horizontal mark on the right side of the column head. • It may be necessary to turn the zero-setting screw to the right or left until the scale balances. © Adam Equipment Company 2006... - Page 11 • The total reading of the two balancing masses will give the final weight of the person on the platform. For example, Lower mass 60 kg + Upper mass 2.5 kg = Total weight of the person is 62.5 kg. © Adam Equipment Company 2006...
- Page 12 © Copyright by Adam Equipment Co. Ltd. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment. Adam Equipment reserves the right to make changes to the technology, features, specifications and design of the equipment without notice.
Need help?
Do you have a question about the MDW-160M and is the answer not in the manual?
Questions and answers