Alarm Settings - Bosch VideoJet 8008 Installation And Operating Manual

EN | 49
VideoJet 8008 | Installation and Operating Manual

Alarm settings

Here, you can make the settings for the alarm sources and alarm connections.
Alarm sources
You can configure the possible alarm triggers for the VideoJet 8008 (for
example the alarm inputs).
Alarm input 1 ... Alarm input 10:
Select the option On in order to activate the alarm via the corresponding external
alarm sensor. Otherwise, select Off.
Select Active high if the alarm is to be triggered by closing the contact. Select
Active low if the alarm is to be triggered by opening the contact.
Name:
You can enter a name for each alarm input, which is then displayed below the
icon for the alarm input on the LIVEPAGE during configuration (see Livepage
configuration, page 94).
Bosch Security Systems | 2005-06 | V2.0 Configuration using a Web Browser