Bosch VideoJet 8008 Installation And Operating Manual page 21

VideoJet 8008 | Installation and Operating Manual
Alarm inputs
The VideoJet 8008 has ten alarm inputs on the orange terminal block. The alarm
inputs are used to connect to external alarm devices, such as door contacts or
sensors. With the appropriate configuration, an alarm sensor can, for example,
trigger an automatic connection between the VideoJet 8008 and a remote
location.
A voltage free make contact or switch can be used as an actuator. Information
about the terminal assignment can be found on page 125.
Note
If possible, use a bounce-free contact system as the actuator.
– Connect the lines to the appropriate terminals on the orange terminal block
and check that the connection is secure.
Bosch Security Systems | 2005-06 | V2.0
EN | 21
Installation