Bosch VideoJet 8008 Installation And Operating Manual page 103

VideoJet 8008 | Installation and Operating Manual
Other information may also be shown next to the live video image on the
Livepage. The display depends on the settings on the Livepage configuration
page (see page 94).
Note
If the connection is not established, the maximum number of possible
connections may already have been reached. The maximum number of
connections depends on the device and network configuration.
Password protection in VideoJet 8008
If the VideoJet 8008 is password-protected against unauthorized access, a
corresponding message and a prompt to enter the password will appear when
you attempt to access protected areas.
Note
A VideoJet 8008 offers you the option of limiting access across various
authorization levels (see pages 46 and 60).
– Enter the user name and the associated password in the appropriate fields.
– Click OK. If the password is correct, the desired page is displayed.
Image selection
You can view the image from each camera individually on a full screen.
– Click on one of the tabs above the live video image for Camera 1 ...
Camera 8 to view the image from the corresponding camera.
– Click on one of the MPEG-4 Stream 1, MPEG-4 Stream 2 or M-JPEG tabs
below the video image to switch between the different displays for the camera
image.
Camera control
Control options for peripheral devices (such as a pan and tilt head or a dome
camera) depend on the type of device installed and the configuration of the
VideoJet 8008.
Bosch Security Systems | 2005-06 | V2.0
EN | 103
Operation