Bosch VideoJet 8008 Installation And Operating Manual page 86

EN | 86
Auto-connect:
Select On if an active connection should be re-established automatically to one
of the previously specified IP addresses after each restart, connection
breakdown or network failure.
Note
For automatic connections, always Stream 2 is transmitted. Take this into
account when assigning the profile (see page 66).
Default camera:
Here you can select the camera whose image will automatically be displayed
first to the receiver after the alarm connection has been established. Depending
on the system configuration, the receiver can then also select the other
cameras.
Note
The numbering corresponds to the labeling of the video inputs on the rear
panel of the unit.
Configuration using a Web Browser
Installation and Operating Manual | VideoJet 8008
Bosch Security Systems | 2005-06 | V2.0