Bosch VideoJet 8008 Installation And Operating Manual page 62

EN | 62
Installation and Operating Manual | VideoJet 8008
Unit time:
Enter the current time here or click Synchr. PC to apply the system time from
your computer to the VideoJet 8008.
Time server
The VideoJet 8008 can receive the time signal from a time server using the time
server protocol (RFC 868) and then use it to set the internal clock. The device
calls up the time signal automatically every ten minutes.
Time zone:
Select the time zone in which the system is located.
Time setting:
Select this during daylight savings time if the time change is to be taken into
account. Deselect the checkbox when standard time has resumed.
Time server IP address:
Enter the IP address of a time server working with the RFC 868 protocol.
Configuration using a Web Browser Bosch Security Systems | 2005-06 | V2.0