Advertisement
3. 調節裁料刀具的咬合度及間隙
鬆開螺帽，旋轉氣缸心軸，向 A 方向旋轉，
運動刀具 FD112C 和固定刀具 FD616 的咬
合度變大，向 B 方向旋轉，則咬合度變小。
請將咬合度調節至 1.0 ～ 2.0mm。（工廠出
貨狀態下的咬合度）
根據縫制條件要求，旋轉螺絲 SK462 調節
運動刀具和固定刀具的咬合間隙。( 建議薄
料時將間隙調大，厚料時將間隙調小 )
P15
A
B
氣缸心軸
螺帽
Air cylinder shaft
Nut
3.The occlusion and the gap of adjusting the
cutter tool.
Loose the nut and turn the air cylinder shaft.
Turn toward the direction A. The occlusion
degree of the movable knife FD112C and
the fixed knife FD616 would be larger.
Turn toward the direction B, the occlusion
degree would be smaller.
Please adjust the occlusion to 1.0~2.0mm.
(The occlusion when manufactured.)
According to the sewing requirements, turn
the screw SK462 to adjust the occlusion
gap of the movable knife and the fixed knife.
(Suggest enlarging the gap when sewing the
light material; narrow the gap when sewing
the heavy material.)
SK 462
Advertisement
