Pptp Status; System Log - Billion BiGuard 10 User Manual

Enable: Whether the IPSec connection is currently Enable or Disable.
Status: Whether the IPSec is Active, Inactive or Disable.
Local Subnet: The local IP address or subnet used.
Remote Subnet: The subnet of the remote site.
Remote Gateway: The remote gateway IP address.
SA: The Security Association for this IPSec entry.
Action: Manually connect or drop the tunnel.

4.2.6 PPTP Status

The PPTP Status window displays the status of the PPTP Tunnels that are currently
configured on your BiGuard 2/10.
Name: The name you assigned to the particular PPTP entry.
Enable: Whether the PPTP connection is currently Enable or Disable.
Status: Whether the PPTP is Active, Inactive or Disable.
Type: Whether the Connection type is Remote Access or LAN to LAN
Peer Network: The Remote subnet for LAN to LAN as connection type.
Connect by: The remote address when connected.
Action: Manually drop the tunnel.

4.2.7 System Log

This window displays BiGuard 2/10's System Log entries. Major events are logged
on this window.
60