Billion Bipac 9800 VNX User Manual
  1. Manuals
  2. Brands
  3. Billion Manuals
  4. Gateway
  5. Bipac 9800 VNX
  6. User manual

Billion Bipac 9800 VNX User Manual

Point-to-point fibre wireless-n (vpn) voip gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BiPAC 9800 VNX(L)
 
Point-to-Point Fibre Wireless-N (VPN)
VoIP Gateway
User Manual
Version Released: 1.11
Last Revised Date: November 20, 2013

Advertisement

Table of Contents
loading

Related Manuals for Billion Bipac 9800 VNX

Summary of Contents for Billion Bipac 9800 VNX

  • Page 1 BiPAC 9800 VNX(L)   Point-to-Point Fibre Wireless-N (VPN) VoIP Gateway User Manual Version Released: 1.11 Last Revised Date: November 20, 2013...

  • Page 2: Table Of Contents

    Table of Contents Chapter 1................................1  1.1 Introducing the BiPAC 9800VNX(L) ......................1  1.2 Features of the BiPAC 9800VNX(L)....................... 3  Network Protocols and Features........................3  WAN Protocol ..............................3  Firewall ................................4  Quality of Service Control..........................4  USB Application Server ...........................4  Virtual Private Network (VPN)........................4  Wireless LAN..............................4  VoIP.................................4  IPTV Applications ............................5  Management ..............................5  1.3 Hardware Specifications..........................5  Physical Interface............................5  1.4 Applications for the BIPAC 9800VNX(L) ....................... 6  Chapter 2................................7  2.1 Important note for using the BIPAC 9800VNX(L)..................7  2.2 Package Contents ............................8  2.3 The Front LEDs..............................9  2.4 The Rear Ports ............................10  2.6 Cabling................................11  Chapter 3................................12  3.1 Before Configuration..........................12  3.1.1 Configuring a PC in Windows 7 ......................13 ...
  • Page 3 4.2.1 Device Info ............................28  4.2.2 System Log............................32  4.2.3 3G/4G‐LTE Status..........................33  4.2.4 Statistics...............................34  4.2.5 DHCP Table ............................39  4.2.6 ARP Table.............................39  4.2.7 IPSEC Status (9800VNX only) .......................40  4.2.8 PPTP Status (9800VNX only) ........................41  4.2.9 L2TP Status (9800VNX only) ........................42  4.2.10 Disk Status ............................42  4.2.11 VoIP Status............................43  4.2.11.1 VoIP Status ..........................43  4.3 Quick Start..............................44  4.4 Configuration..............................51  4.4.1 Interface Setup ............................52  4.4.1.1 Internet ............................53  4.4.1.2 LAN..............................63  4.4.1.3 Wireless............................66  4.4.1.4 Wireless MAC Filter ........................78  4.4.2 Dual WAN ............................79  4.4.2.1 General Setting ..........................79  4.4.3 Advanced Setup...........................81  4.4.3.1 Firewall............................82  4.4.3.2 Routing............................83  4.4.3.3 NAT..............................85  4.4.3.4 Static DNS............................90  4.4.3.5 QoS..............................91  4.4.3.6 IPSEC Setting (9800VNX only) .......................94  4.4.3.7 PPTP (9800VNX only) ........................103 ...
  • Page 4 4.4.5.6 CWMP (TR‐069)........................... 146  4.4.5.7 Parental Control..........................148  4.4.5.8 SAMBA & FTP Server........................149  4.4.6 Maintenance............................153  4.4.6.1 User Management ........................154  4.4.6.2 Time Zone ...........................155  4.4.6.3 Firmware & Configuraion......................156  4.4.6.4 System Restart ..........................158  4.4.6.5 Diagnostics Tool ..........................159  Chapter 5................................162  Problems starting up the router ......................162  Problems with the WAN Interface......................162  Problems with the LAN Interface......................162  APPENDIX ................................163 ...

  • Page 5: Introducing The Bipac 9800Vnx(L)

    Chapter 1 Introduction the BIPAC 9800VNX(L) 1.1 Introducing the BiPAC 9800VNX(L) The BiPAC 9800VNX(L) is a point-to-point (Active Ethernet) Fibre Optical Gateway future ultra-fast connectivity (FTTP/FTTH) – with uniquely Small Form Factor Pluggable (SFP) interface that can support 100Base or 1000Base connectivity in a box.
  • Page 6 Dual stack means the router is capable of running IPv4 and IPv6 in parallel during the transition period. With Billion IPv6 enabled devices, three major transition mechanisms such as Dual-Stack, Dual-Stack Lite, and 6RD (IPv6 rapid deployment) are supported to be adapted easily into service provider’s IPv4/IPv6 network.*1 Quick Start Wizard Support a WEB GUI page to install this device quickly.

  • Page 7: Features Of The Bipac 9800Vnx(L)

    1.2 Features of the BiPAC 9800VNX(L) • WAN Interface supports up to 1000Mbps downstream and upstream wire-speed (over 900Mbps) rates • SFP interface supports 100Base or 1000Base fibre connectivity • Extra Rj-45 EWAN WAN port for connecting to ADSL/VDSL/Cable/Fibre modem devices •...

  • Page 8: Firewall

    Firewall • Built-in NAT Firewall • Stateful Packet Inspection (SPI) • DoS attack prevention including Land Attack, Ping of Death, etc • Access Control • IP&MAC filter, URL Content Filter • Password protection for system management • VPN pass-through Quality of Service Control •...

  • Page 9: Iptv Applications

    IPTV Applications • IGMP Snooping and IGMP Proxy • MLD Snooping and MLD Proxy • Virtual LAN (VLAN) • Quality of Service (QoS) Management • Quick Installation Wizard • Web-based GUI for remote and local management (IPv4/ IPv6) • Firmware upgrades and configuration data upload and download via web-based GUI •...

  • Page 10: Hardware Specifications

    1.3 Hardware Specifications Physical Interface • WAN: 100/1000BASE SFP interface for direct connection to Fibre • EWAN: RJ-45 Gigabit Ethernet port for connecting to ADSL/Cable/VDSL/Fibre modem device • Ethernet LAN: 4-port 10/100/1000Mbps auto-crossover (MDI/ MDI-X) switch • VoIP Phone port: 2 RJ-11 FXS for connecting to regular telephones •...

  • Page 11: Applications For The Bipac 9800Vnx(L)

    1.4 Applications for the BIPAC 9800VNX(L) BIPAC 9800VNX(L) is an all-in-one router, supporting alternative ways (3G/4G-LTE, EWAN) to connect to the Internet. Then users can choose one of the ways to connect to the Internet or ISP. overview SFP (direct connection to fibre) mode BIPAC 9800VNX(L) has a SFP interface for direct fibre connection.
  • Page 12 3G/ 4G-LTE router mode BIPAC 9800VNX(L) supports one USB ports for your 3G/ 4G-LTE dongle. It can be used to connect to 3G/ 4G-LTE connection. Broadband router mode BIPAC 9800VNX(L) has a Gigabits Ethernet WAN port to connect to your Fibre/ Cable/ xDSL modem.

  • Page 13: Chapter 2

    Chapter 2 Installing the BIPAC 9800VNX(L) 2.1 Important note for using the BIPAC 9800VNX(L)  Do not use the BIPAC 9800VNX(L) in high humidity or high temperatures. Do not use the same power source for the BIPAC 9800VNX(L) as  other equipment.

  • Page 14: Package Contents

    2.2 Package Contents BIPAC 9800VNX(L) - Point-to-Point Fibre Wireless-N (VPN) VoIP Gateway Quick Start Guide CD containing user manual Two detachable wireless Antennas Ethernet (RJ-45 CAT-5) cable Power adapter...

  • Page 15: The Front Leds

    2.3 The Front LEDs Status Meaning Green System ready Power Boot failed Green Transmission speed hitting 1000Mbps EWAN Orange Transmission speed hitting 10/100Mbps Blinking Data being transmitted/received Green Transmission speed hitting 1000Mbps Orange Transmission speed hitting 10/100Mbps Ethernet (1-4) Blinking Data being transmitted/ received Green Successfully connected the Fibre.

  • Page 16: The Rear Ports

    2.4 The Rear Ports Port Meaning Power on/off the router. Power Switch Connect the supplied DC power adapter to this jack. Power Jack After the device is powered on, press it 6 seconds or above: to restore to factory default settings (this is used when you can not login to the router, e.g. forgot the RESET password) By controlling the pressing time, users can achieve two different effects:...

  • Page 17: Cabling

    Make sure that all other devices (e.g. telephones, fax machines, analogue modems) connected to the same telephone line as your Billion router have a line filter connected between them and the wall socket (unless you are using a Central Splitter or Central Filter installed by a qualified and licensed electrician), and that all line filters are correctly installed in a right way.

  • Page 18: Chapter 3

    Chapter 3 Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Windows 98/NT/2000/XP/Vista/Win7, Linux, Mac OS, etc. The product provides an easy and user-friendly interface for configuration. 3.1 Before Configuration PCs must have an Ethernet interface installed properly and be connected to the router either directly or through an external repeater hub, and have TCP/IP installed and configured to obtain an IP address through a DHCP...

  • Page 19: Configuring A Pc In Windows 7

    3.1.1 Configuring a PC in Windows 7 Go to Start. Click on Control Panel. Then click on Network and Internet. When the Network and Sharing Center window pops up, select and click on Change adapter settings on the left window panel. Select the Local Area Connection, and right click the icon to select Properties.
  • Page 20 IPv4: Select Internet Protocol Version 4 (TCP/IPv4) then click Properties In the TCP/IPv4 properties window, select the Obtain an IP address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply the new configuration.
  • Page 21 IPv6: Select Internet Protocol Version 6 (TCP/IPv6) then click Properties In the TCP/IPv6 properties window, select the Obtain an IPv6 address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply the new configuration.

  • Page 22: Configuring A Pc In Windows Vista

    3.1.2 Configuring a PC in Windows Vista 1. Go to Start. Click on Network. Then click on Network and Sharing Center at the top bar. 2. When the Network and Sharing Center window pops up, select and click on Manage network connections on the left window pane.
  • Page 23 IPv4: 4. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties. 5. In the TCP/IPv4 properties window, select the Obtain an IP address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting. 6. Click OK again in the Local Area Connection Properties window to apply the new configuration.

  • Page 24: Configuring A Pc In Windows Xp

    3.1.3 Configuring a PC in Windows XP IPv4: 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4.
  • Page 25 IPv6: IPv6 is supported by Windows XP, but you should install it first. Act as shown below: 1. On the desktop, Click Start > Run, type cmd, then press Enter key in the keyboard, the following screen appears. 2. Key in command ipv6 install Configuration is OK now, you can test whether it works ok.

  • Page 26: Configuring A Pc In Windows 2000

    3.1.4 Configuring a PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4.

  • Page 27: Configuring A Pc In Windows 98/Me

    3.1.5 Configuring a PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC.

  • Page 28: Configuring A Pc In Windows Nt4.0

    3.1.6 Configuring a PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK.

  • Page 29: Factory Default Settings

    3.2 Factory Default Settings Before configuring your router, you need to know the following default settings. Web Interface: Username: admin Password: admin LAN Device IP Settings: IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 DHCP server: DHCP server is enabled. Start IP Address: 192.168.1.100 IP pool counts: 20 3.2.1 Username and Password The default username and password are “admin”...

  • Page 30: Lan Port Addresses

    3.3 LAN Port Addresses The parameters of LAN ports are pre-set in the factory. The default values are shown below. IPv4: 192.168.1.254 IP address 255.255.255.0 Subnet Mask Enabled DHCP server function 20 IP addresses continuing from 192.168.1.100 through IP addresses for distribution to PCs 192.168.1.119 3.4 Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service...

  • Page 31: Chapter 4

    Chapter 4 Configuration 4.1 Configuring BiPAC 9800VNX(L) with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “OK”, a user name and password window prompt will appear. The default username and password are “admin” and “admin”.
  • Page 32 At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: Status(Device Info, System Log, 3G/4G-LTE Status, Statistics, DHCP Table, ARP Table, IPSEC Status, PPTP Status, L2TP Status, Disk Status, VoIP Status) Quick Start (Wizard Setup) Configuration (Interface Setup, Dual WAN, Advanced Setup, VoIP, Access Management, Maintenance) Language...

  • Page 33: Status

    4.2 Status In this section, you can check the router working status, including Device Info, System Log, 3G/4G-LTE Status, Statistics, DHCP Table, ARP Table, IPSEC Status, PPTP Status, L2TP Status, Disk Status, and VoIP Status.

  • Page 34: Device Info

    4.2.1 Device Info Users will see device's basic information in this page. EWAN...
  • Page 36 3G/ 4G-LTE USB...
  • Page 37 Device Information Model Name: Show model name of the router Firmware Version: This is the Firmware version MAC Address: This is the MAC Address  IPv4: IP Address: LAN port IPv4 address. Subnet Mask: LAN port IP subnet mask. DHCPv4 Server: LAN port DHCP role - Enabled, Relay or Disabled. ...

  • Page 38: System Log

    4.2.2 System Log In system log, users can check the operations to the router and track the glitches to the router when occurred. Refresh: Press this button to refresh the statistics.

  • Page 39: 4G-Lte Status

    4.2.3 3G/4G-LTE Status In this page users can check the 3G/4G-LTE connection information. Status: The current status of the 3G/4G-LTE connection. Signal Strength: The signal strength bar and dbm value indicates the current 3G/ 4G-LTE signal strength. On the front panel, the 3G/ 4G-LTE Signal Strength LED indicates the signal strength too. Signal Information: Giving out some important LTE signal parameters like RSRP(Reference Signal Receiving Power), RSRQ(Reference Signal Receiving Quality), SINR(Signal to Interference plus Noise Ratio).

  • Page 40: Statistics

    4.2.4 Statistics  Ethernet Interface: This field displays the type of port Transmit Frames: This field displays the number of frames transmitted until the latest second. Transmit Multicast Frames: This field displays the number of multicast frames transmitted until the latest second.
  • Page 41  Wireless Transmit Frames: This field displays the number of frames transmitted until the latest second. Transmit Error Frames: This field displays the number of error frames transmitted until the latest second. Transmit Drop Frames: This field displays the number of drop frames transmitted until the latest second. Receive Frames: This field displays the number of frames received until the latest second.
  • Page 42  EWAN Transmit Frames: This field displays the total number of frames transmitted until the latest second. Transmit Multicast Frames: This field displays the total number of multicast frames transmitted till the latest second. Transmit Total Bytes: This field displays the total number of bytes transmitted until the latest second. Transmit Collision: This is the number of collisions on this port.
  • Page 43  Transmit Frames: This field displays the total number of frames transmitted until the latest second. Transmit Multicast Frames: This field displays the total number of multicast frames transmitted till the latest second. Transmit Total Bytes: This field displays the total number of bytes transmitted until the latest second. Transmit Collision: This is the number of collisions on this port.
  • Page 44  3G/4G-LTE USB Transmit Frames of Current Connection: This field displays the total number of 3G/4G LTE frames transmitted until the latest second for the current connection. Transmit Bytes of Current Connection: This field shows the total bytes transmitted till the latest second for the current connection for the current connection.

  • Page 45: Dhcp Table

    4.2.5 DHCP Table DHCP table displays the devices connected to the router with clear information. #: The index identifying the connected devices. Host Name: Show the hostname of the PC. IP Address: The IP allocated to the device. MAC Address: The MAC of the connected device. Expire Time: The total remaining interval since the IP assignment to the PC.

  • Page 46: Ipsec Status (9800Vnx Only)

    4.2.7 IPSEC Status (9800VNX only) #: The IPSec entry index number. Connection Name: User-defined IPSEC VPN connection name. Remote Gateway: The IP of the remote gateway. Local Address: The IP and netmask of local access range. Remote address: The IP and netmask of remote access range. Connected: Show the connecting status.

  • Page 47: Pptp Status (9800Vnx Only)

    4.2.8 PPTP Status (9800VNX only) PPTP Client User: Four users(sessions) for client sessions. Here shows the using user. Connection Name: Show user-defined PPTP VPN connection name. Active: Show if the tunnel is active for connection. Connection Type: Remote Access or LAN to LAN. Server IP: Show the IP of VPN Server.

  • Page 48: L2Tp Status (9800Vnx Only)

    4.2.9 L2TP Status (9800VNX only) Name: Display the user-defined L2TP connection name. Type: The VPN mode: dialin or dialout. Connect: The connecting status. Active: Show if the L2TP tunnel is active for connection. Username: The user assigned to client (dialout use) or the user set for client to connect in (dialin use). 4.2.10 Disk Status Partition: Display the NAS partition.

  • Page 49: Voip Status

    4.2.11 VoIP Status 4.2.11.1 VoIP Status VoIP status give users a directive picture on the registered VoIP accounts. Phone Number: The phone number user registers and fills in the Basic page of VoIP. Host: Show the IP address and port number of SIP Registrar. Status: The status of the registered SIP account.

  • Page 50: Quick Start

    4.3 Quick Start For detailed instructions on configuring WAN settings, see the Interface Setup section of this manual. The Quick Start Wizard is a useful and easy utility to help setup the device to quickly connect to your ISP (Internet Service Provider) with only a few steps required. It will guide you step by step to configure the password, time zone, and WAN settings of your device.
  • Page 51 Step3: Set your wireless connection. Click NEXT to continue.
  • Page 52 Step4: Set your Internet connection WAN Transfer Modes: EWAN, SFP and 3G/4G-LTE  SFP (SFP interface for direct connection to fibre ) 1). Select SFP. Refer to your ISP to choose the appropriate connection protocol. Click NEXT to continue. Enter the PPPoE account information provided to you by your ISP. Click NEXT to continue. 3).The Setup Wizard has completed.
  • Page 53  3G/4G-LTE USB 1) Select 3G/4G-LTE (for example). 2). Type relevant 3G/4G-LTE parameters from your ISP. 3). Click Next to save changes. 4). Quick Start completed!.
  • Page 54 Switch to Status > Device Info to view the status.
  • Page 55  EWAN 1). Select EWAN. Refer to your ISP to choose the appropriate connection protocol. Click NEXT to continue. Enter the PPPoE account information provided to you by your ISP. Click NEXT to continue. 3).The Setup Wizard has completed. Click on BACK to modify changes or mistakes. Click NEXT to save the current settings.
  • Page 56 Switch to Status > Device Info to view the status.    ...

  • Page 57: Configuration

    4.4 Configuration Click this item to access the following sub-items that configure the router: Interface Setup, Dual WAN, Advanced Setup, VoIP, Access Management, and Maintenance.

  • Page 58: Interface Setup

    4.4.1 Interface Setup First, let us take a look at the Interface Setup. There are four items contained in this section, namely, Internet, LAN, Wireless and Wireless MAC Filter. Each is described in the following scenario.
  • Page 59 4.4.1.1 Internet  SFP (direct connection to fibre)
  • Page 60 Status: Select whether to enable the service. Line Speed: Select the exact working line speed (1G/100M) for SFP. IPv4/IPv6 IP version: choose IPv4, IPv4/IPv6, IPv6 based on users’ environment. Here we take IPv4/IPv6 for example, when you just choose IPv4 or IPv6, you can just get information from the following listed parameters.
  • Page 61 IPv4 options: Get IP Address: Choose Static or Dynamic Static IP Address: If Static is selected in the above field, please enter the specific IP address you get from ISP and the following IP subnet mask and gateway address. IP Subnet Mask: The default is 0.0.0.0. User can change it to other such as 255.255.255.0.Type the subnet mask assigned to you by your ISP (if given).
  • Page 62 When router’s Internet configuration is finished successfully, you can go to status to get the connection information.
  • Page 63  EWAN...
  • Page 64 Status: Select whether to enable the service. IPv4/IPv6 IP version: choose IPv4, IPv4/IPv6, IPv6 based on users’ environment. Here we take IPv4/IPv6 for example, when you just choose IPv4 or IPv6, you can just get information from the following listed parameters. ISP Connection Type: ISP: Select the encapsulation type your ISP uses.
  • Page 65 IP Subnet Mask: The default is 0.0.0.0. User can change it to other such as 255.255.255.0.Type the subnet mask assigned to you by your ISP (if given). Gateway: Enter the specific gateway IP address you get from ISP. NAT: Select Enable if you use this router to hold a group of PCs to get access to the internet. Dynamic Route: RIP Version: (Routing Information protocol) Select this option to specify the RIP version, including RIP-1, RIP-2.
  • Page 66 When router’s Internet configuration is finished successfully, you can go to status to get the connection information.
  • Page 67  3G/4G-LTE USB The BIPAC 9800VNX(L) supports 3G/4G-LTE USB(additional 3G/4G-LTE modem connected to the USB port). Status: Choose Activated to enable the 3G connection. Network Mode: There are 8 options of service standards: “Automatic”, “UMTS 3G only”, “GSM 2G Only”, “UMTS 3G Preferred”, “GSM 2G Preferred”, “GSM and UMTS Only”, “LTE Only”, “GSM, UMTS, LTE”.
  • Page 68 When router’s Internet configuration is finished successfully, you can go to status to get the connection information.
  • Page 69 4.4.1.2 LAN A Local Area Network (LAN) is a shared communication system to which many computers are attached and is limited to the immediate area, usually the same building or floor of a building. IPv6 The IPv6 address composes of two parts, thus, the prefix and the interface ID. There are two ways to dynamically configure IPv6 address on hosts.
  • Page 70 IPv4 Parameters IP Address: Enter the IP address of Router in dotted decimal notation, for example, 192.168.1.254 (factory default). IP Subnet Mask: The default is 255.255.255.0. User can change it to other such as 255.255.255.128. Alias IP Address: This is for local networks virtual IP interface. Specify an IP address on this virtual interface. Alias IP Subnet Mask: Specify a subnet mask on this virtual interface.
  • Page 71 Fixed Host In this field, users can map the specific IP (must in the DHCP IP pool) for some specific MAC, and this information can be listed in the following table. IP Address: Enter the specific IP. For example: 192.168.1.110. MAC Address: Enter the responding MAC.
  • Page 72 4.4.1.3 Wireless This section introduces the wireless LAN and some basic configurations. Wireless LANs can be as complex as a number of computers with wireless LAN cards communicating through access points which bridge network traffic to the wired LAN. Access Point Settings Access Point: Default setting is set to Activated.
  • Page 73 Channel: The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a channel. There are Regulation Domains and Channel ID in this field. The Channel ID will be different based on Regulation Domains. Select a channel from the drop-down list box. Beacon interval: The Beacon Interval value indicates the frequency interval of the beacon.
  • Page 74 Wi-Fi Protected Setup PIN Method: Configure AP as Registrar 1. Jot down the client’s Pin (eg. 04640776). 2. Enter the Enrollee(Client) PIN code and then press Start WPS.
  • Page 75 3. Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Config Mode as Enrollee, press the WPS button on the top bar, select the AP (eg. Billion_AP) from the WPS AP List column. Then press the PIN button located on the middle left of the page to run the scan.
  • Page 76 4. The client’s SSID and security setting will now be configured to match the SSID and security setting of the registrar (router).
  • Page 77 PIN Method: Configure AP as Enrollee 1. Jot down the WPS PIN (eg. 03454435).Press Start WPS.
  • Page 78 2. Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Config Mode as Registrar. Enter the PIN number in the PIN Code column then choose the correct AP (eg. Billion_AP) from the WPS AP List before pressing the PIN button to run the scan.
  • Page 79 3. The router’s (AP’s) SSID and security setting will now be configured to match the SSID and security setting of the registrar (client). 4. Now to make sure that the setup is correctly done, cross check to see if the SSID and the security setting of the registrar setting match with the parameters found on both Wireless Configuration and Wireless Security Configuration page.
  • Page 80 PBC Method: 1. Press the PBC radio button, Then Start WPS. 2. Launch the wireless client’s WPS Utility (eg. Ralink Utility). Set the Config Mode as Enrollee. Then press the WPS button and choose the correct AP (eg. Billion_AP) from the WPS AP List section before pressing the PBC button to run the scan.
  • Page 81 3. When the PBC button is pushed, a wireless communication will be established between your router and the PC. The client’s SSID and security setting will now be configured to match the SSID and security setting of the router.
  • Page 82 Security Settings Security Type: You can disable or enable wireless security for protecting wireless network. The default type of wireless security is OPEN and to allow all wireless stations to communicate with the access points without any data encryption. To prevent unauthorized wireless stations from accessing data transmitted over the network, the router offers secure data encryption, known as WEP and WPA.
  • Page 83  WPA-PSK & WPA2-PSK WPA Algorithms: TKIP (Temporal Key Integrity Protocol) or AES (Advanced Encryption System) utilizes a stronger encryption method and incorporates Message Integrity Code (MIC) to provide protection against hackers. Pre-Shared key: The key for network authentication. The input format should be 8-63 ASKII characters or 64 hexadecimal characters Key Renewal Interval: The time interval for changing the security key automatically between wireless client and AP.
  • Page 84 4.4.1.4 Wireless MAC Filter The MAC filter screen allows you to configure the router to give exclusive access to up to 8 devices (Allow Association) or exclude up to 8 devices from accessing the router (Deny Association). Every Ethernet device has a unique MAC (Media Access Control) address.

This manual is also suitable for:

Bipac 9800 vnxl

Table of Contents