Rear Panel - Billion BiGuard 10 User Manual

Link/ACT:
LAN Lit when connected to an Ethernet device.
1 – 8 10/100M :
Link/ACT:

1.3.1.2 Rear Panel

1
Port
1 RESET
LAN
2 1X — 8X
(RJ-45 connector)
3
WAN
DC12V
4
Lit when device is connected.
Blinking when data is transmitting/receiving.
Lit green when connected at 100Mbps.
Not lit when connected at 10Mbps.
Lit when device is connected.
Blinking when data is transmitting/receiving.
2
After the device is powered on, press it to reset the device or restore to factory
default settings.
0-3 seconds: The Status LED will light
6 seconds above: restore to factory default settings (this is used when you
cannot login to the router. E.g. forgot the password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the eight LAN ports
when connecting to a PC or an office/home network of 10Mbps or 100Mbps.
WAN 10/100M Ethernet port (with auto crossover support); connect
xDSL/Cable modem here.
Connect DC power adapter here.(DC12V Power)
12
3
Meaning
4