Windows 98 / Me; Installing Components - Billion BiGuard 10 User Manual

2. In the Command Prompt window, type ipconfig and then press ENTER.
If you are using BiGuard 2/10's default settings, your PC should have:
- An IP address between 192.168.1.1 and 192.168.1.253
- A subnet mask of 255.255.255.0

3.4.4 Windows 98 / Me

3.4.4.1 Installing Components

To prepare Windows 98/Me PCs for TCP/IP networking, you may need to manually
install TCP/IP on each PC. To do this, follow the steps below. Be sure to have your
Windows CD handy, as you may need to insert it during the installation process.
37