Pptp - Billion BiGuard 10 User Manual

Key Life Time: Allows you to specify the timer interval for renegotiation of
another key. The value is in seconds e.g. 3600 seconds = 1 hour.
Netbios Broadcast: Allows BiGuard to send local Netbios Broadcast packet through
the IPSec Tunnel, please select Enable or Disable.
DPD Setting: DPD, Dead Peer Detection.
DPD Function: Select Enable or Disable DPD function.
Detection Interval: please input the interval time to send out DPD packet.
Idle Timeout: Please input the consecutive no response time to disconnect this
tunnel.
Click the Apply button to save your changes.
After you have created the IPSec connection, the account information will be
displayed:
Name: This is the user-defined name of the connection.
Enable: This function activates or deactivates the IPSec connection.
Local Subnet: Displays IP address and subnet of the local network.
Remote Subnet: Displays IP address and subnet of the remote network.
Remote Gateway: This is the IP address or Domain Name of the remote VPN device
that is connected and has an established IPSec tunnel.
IPSec Proposal: This is the selected IPSec security method.
For examples on how to apply IPSec to your network, see Appendix F: IPSec Logs
and Events.

4.4.5.2 PPTP

PPTP is a set of protocols that enable Virtual Private Networks (VPN). VPN is a way
to establish secured communication tunnels to an organization's network via the
Internet.
100