Save Configuration To Flash; Logout - Billion BiGuard 10 User Manual

VLAN Name: Please input VLAN name of this rule.
VLAN ID: Please input VLAN ID that will be used for Tagged member port(s).
Tagged Member port(s): Please check the interface that you would like to use in this
VLAN ID group.
Untagged Member port(s): Please check the interface that you would like to use in
this VLAN ID group.
Click Apply to add this rule.

4.5 Save Configuration To Flash

After changing the router's configuration settings, you must save all of the
configuration parameters to flash memory to avoid them being lost after turning off
or resetting your router. Click Apply to write your new configuration to flash
memory.

4.6 Logout

To exit the router's web interface, click Logout. Please ensure that you have saved
115