The Rear Ports - Billion BiGuard 10 Quick Start Manual

The Rear Ports

1
Port
1 RESET
LAN
1X —
2
(RJ-45
connector)
WAN
3
DC12V
4
BiGuard 10 iBusiness Security Gateway Small-Office
After the device is powered on, press it to reset the device or restore to
factory default settings.
0-3 seconds: The Status LED will light
6 seconds above: restore to factory default settings (this is used when
you cannot login to the router. E.g. forgot the password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the eight
8X
LAN ports when connecting to a PC or an office/home network of
10Mbps or 100Mbps.
WAN 10/100M Ethernet port (with auto crossover support); connect
xDSL/Cable modem here.
Connect DC power adapter here.(DC12V Power)
2
Meaning
3
4
3