Hitachi HISCREW V PLUS NEXT Series Instruction Manual page 10

3. HOW TO OPERATE [Air Compressor Instrumentation]
■ Remote Operation and PQ Wide Mode Function.
REMOTE Buttons
Each time the REMOTE button to
toggle between a remote operation
and a local operation (
运行管理
Ｒ ＵＮＮ Ｉ ＮＧ ＣＯＮ Ｔ Ｒ Ｏ Ｌ
警 报
Ａ Ｌ Ａ ＲＭ
重新设定
功 能
Ｆ ＵＮＣ
SELECT/WIDEMODE Button and Light (yellow)
For setting the PQ Wide Mode on.
Press and hold the SELECT/WIDE button
for 7 sec. or longer. The light blinks and
the mode should be set.
■ Digital Monitor Setting Mode Operation (F mode)
Each time you press and hold the SELECT button for more than 3 seconds while pressing the RESET button, the
display mode of the monitor display changes (monitor mode ←→ setting mode). When in setting mode (F mode),
you can change operation for each item as needed. The function of the buttons at this time changes to the function
of the contents shown on the button. (
F Mode
功 能
Contents
Function
F mode and its contents
change each time pressed.
STR
When contents are displayed, contents
set by / ２ button changes and are
１
entered by pressing the STR button.
When you have returned to monitor
mode, the changes are reflected in
operation control.
8
REMOTE Light (green)
Comes to (glows on blink) when a remote
operation is enabled.
Also, comes to blink when the multiple unit
see p.16).
control setting.
运行状况
Ｒ ＵＮＮ Ｉ ＮＧ ＭＯＤ Ｅ
远 程
Ｒ ＥＭＯ Ｔ Ｅ
负 载
Ｌ ＯＡＤ
Ｒ Ｅ Ｓ Ｅ Ｔ
故 障
Ｓ ＨＵ Ｔ ＤＯＷＮ
显示转换 ／
开 机
远 程
扩展模式
Ｒ ＥＭＯ Ｔ Ｅ
Ｓ Ｅ Ｌ Ｅ Ｃ Ｔ／Ｗ Ｉ Ｄ Ｅ
存 储
２
１
Ｓ Ｔ Ｒ
see p. 13-16)
２
Return
Advance
１
存 储
电 源
Ｐ ＯＷＥ Ｒ
自动启动
ＡＵ Ｔ Ｏ Ｓ Ｔ Ａ Ｒ Ｔ
停 机
Ｓ Ｔ Ａ Ｒ Ｔ Ｓ Ｔ Ｏ Ｐ
运行管理
Ｒ ＵＮＮ Ｉ ＮＧ ＣＯＮ Ｔ Ｒ Ｏ Ｌ
警 报
Ａ Ｌ Ａ ＲＭ
功 能 重新设定
Ｒ Ｅ Ｓ Ｅ Ｔ
Ｆ ＵＮＣ
显示转换 ／
远 程
扩展模式
Ｒ ＥＭＯ Ｔ Ｅ Ｓ Ｅ Ｌ Ｅ Ｃ Ｔ／Ｗ Ｉ Ｄ Ｅ
存 储
１
Ｓ Ｔ Ｒ
１
Advances
display contents.
IMPORTANT
If you want to permanently enable a
remote operation with the REMOTE
light on (non-blinking), switch from
monitor mode to setting mode (F
mode).
If you want to use an external setting
switch for enabling/disabling a
remote operation with the REMOTE
light on (blinking), connect the wires
between the external setting switch
and the starter/control box. For more
information, see p. 16.
运行状况
Ｒ ＵＮＮ Ｉ ＮＧ ＭＯＤ Ｅ
远 程
电 源
Ｒ ＥＭＯ Ｔ Ｅ
Ｐ ＯＷＥ Ｒ
负 载
Ｌ ＯＡＤ
自动启动
故 障
ＡＵ Ｔ Ｏ Ｓ Ｔ Ａ Ｒ Ｔ
Ｓ ＨＵ Ｔ ＤＯＷＮ
开 机 停 机
Ｓ Ｔ Ａ Ｒ Ｔ Ｓ Ｔ Ｏ Ｐ
２
２
Returns display
contents.