3.4 How to Set Control Functions
■ Various settings (instantaneous power interruption (IPI), remote operation,
capacity control setting, pressure setting, etc.)
Switches display from monitor mode to setting mode (F mode).
重新设定
显示转换
Press and hold
simultaneously for at
least 3 seconds.
Perform same
operation to return.
3. HOW TO OPERATE [How to Set Control Functions]
1
Forward
1
2
Back
Displays 000
th
item of F mode.
Changes each time FUNCTION is pressed.
Displays setting contents.
F000: (0: Sets single unit operation.)
For details, see the F mode table.
To alter settings, change the values with the
buttons. ( see p.14)
2
1
F000: (1: Sets multiple unit control.)
Press ENTER to enter the settings.
Back
13